It’s common for the lock mechanism of your door to jam from time to time as a result of inserting and removing the key frequently. The cool thing is that you can effortlessly repair the lock. If your residence has a padlock, here are the steps that you should follow to repair the lock:

How to Repair a Padlock

You should start by opening the door open and tightening all the hinge screws utilizing a screwdriver. If you find that a screw doesn’t make it tighter you should replace it with a 2 ½-inch wood screw that will effortlessly bite into the wall stud.

Professionals say that doorjambs are quite thin thus screws typically pull out of them particularly when they are supporting a heavy entrance door. When you make tighter the screws you steady the hinges which will most probably correct the issue with the lock. Emergency Locksmith San Francisco is always equipped to offer instant

You must then open the door and authorize if the marks are aligned with the top and bottom of the strike opening. If the marks don’t line up you should repair them by grinding the top edge of the strike.

This will precise the misalignment of 1/8inch or less. If the misalignment is greater than 1/8 inch you should remove and remove the strike, chisel out the opening, and reposition the strike in order to line up with the new opening. You must then fill the screw holes with epoxy putty and drill new holes for the screws.

If the lock mechanism doesn’t turn, you should take to pieces the lock. To do this you require removing the badge from the deal with inside the door and unscrewing the two bolts that hold the lock together. You must then pull the lock apart and spray a lubricant on the mechanism. After this, you must reassemble the lock.